Pages

Batch Pasteurizer

The parts of a typical batch pasteurizer are following:
  •  Insulated outer casing
  •  Insulated hinged cover
  •  Stainless steel inner vessel
  •  Agitator and its motor
  •  Outlet cock and heating water distribution pipe.
Batch Pasteurizer
Batch Pasteurizer
This system is well suited for small-scale operation, where less than 3000 to 5000 litres of milk are available. The vat may be rectangular, but a vertical, cylindrical design is preferred for practical reasons. The vat normally consists of an inner vessel, surrounded by an insulated outer casting, thus forming a jacket, through which hot water or steam is passed (Figure 5.1). After the milk has reached the required temperature (63.0°C), it is usually held at that temperature for a certain fixed period (30 minutes). Thereafter, it is cooled as quickly as possible either by circulating refrigerant/chilled water or through plate/surface chiller. Cooling the milk after pasteurization by circulating a refrigerant – in most cases cold water through the jacket or the vat may take much time. Therefore, a separate small-capacity surface, tubular or plate cooler may be used to rapidly cool the milk to the required temperature. This system also has the advantage that the vat will be available sooner for the pasteurization of another batch of milk.

Batch pasteurizers have a small heating surface area relative to their contents.Heat transfer is greatly improved by agitating the milk. Agitators of different design are used for this purpose. They may even consist of double-walled paddles or other devices with internal steam or water circulation. Care must be taken to avoid foam formation during filling of vat. It is very difficult to heat the milk and foam together uniformly and consequently microorganisms present in the foam may survive pasteurization. If the inlet valve is at the bottom of the vat, foam formation can easily be prevented. A lid or cover on top of the vat promotes a uniform temperature of the contents and prevents skin formation on the milk.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.

 

Most Reading